Well Pump Replacement Cost

Installed prices for submersible and jet pumps, and why depth matters so much.

Typical prices

Angi puts a typical well pump replacement at $974 to $2,821, averaging $1,897 (Aug 2026). By type: submersible $1,000 to $2,500+, shallow-well jet $450 to $1,500, deep-well jet $800 to $2,200+, and constant-pressure systems $1,300 to $4,000+. Wells over 150 ft can run $2,000 to $10,000+ (Angi).

By component

Part or service	Typical cost	Source
House call	$100 to $150	Angi; HomeAdvisor $150
Repair labor	$50/hr, $100/hr after hours	Angi
Pump unit only, no labor	$150 to $1,700	HomeGuide
Pipework and electrical labor on a replacement	$250 to $1,000	Angi
Pump-pulling rig	+$300 to $700	DrillerDB (secondary)
Pressure tank	$300 to $700	Angi; HomeGuide $800 to $1,500
Pressure switch	$120 to $175	Angi
Control box	$200 to $500	Angi
Motor start capacitor	$100 to $150	Angi
Constant-pressure system	$1,300 to $4,000+	Angi; HomeGuide $2,000 to $5,000

Why depth drives cost

Every foot of drop pipe and wire has to come up and go back down, often with a pump hoist truck. Angi's depth bands run $400 to $3,000+ under 25 ft, $1,200 to $5,500+ at 25 to 150 ft and $2,000 to $10,000+ beyond 150 ft. Replacing pipe and wire adds about $1 to $3 per foot each (The Well Guide).

Repair or replace?

Angi says submersible pumps last 8 to 15 years and jet pumps 8 to 10. The Well Guide's rule of thumb: if the pump has to be pulled and the repair would cost more than half of a replacement, replace it.

Sources

Sources: Angi, Well Pump Replacement Cost (Aug 31, 2026); Angi, Well Pump Repair Cost (Sep 15, 2026); Angi, Pressure Tank Replacement Cost (Sep 18, 2026); HomeGuide, Well Pump Cost (Aug 7, 2025); HomeGuide, Pressure Tank Cost (Jul 25, 2025); HomeAdvisor, Replace a Well Pump (Jun 17, 2026). Retrieved Oct 11–13, 2026. Pipe and wire: The Well Guide (Mar 2026); rig fee: DrillerDB (Jul 2026, secondary).

How we built these numbers

Sources. Each price is copied as published from a named, dated cost guide. We don’t round, blend or adjust for inflation.

Replacement range ($974–$2,821, average $1,897): as published by Angi, Well Pump Replacement Cost (updated Aug 31, 2026).
Repair range ($373–$1,624, average $974): as published by Angi, Well Pump Repair Cost (updated Sep 15, 2026).
Pressure tank: $300–$700 from Angi (Sep 18, 2026) and $800–$1,500 from HomeGuide (Jul 25, 2025). The two measure different jobs, so we show both.
Drop pipe and wire per-foot prices: The Well Guide (Mar 2026).
Our estimates (labeled "est." in the estimator): the region multiplier is our own adjustment, not a published figure.

Date checked. All sources were retrieved Oct 11–13, 2026 and fact-checked on 2026-10-13.

How ranges are built. Low and high figures are the source’s published typical range. Anything we calculate ourselves is labeled as an estimate. These are planning ranges, not quotes.

Update cadence. We recheck the cost figures against the sources at least once a year and update the date on the page when they change.

Reuse. Our cost tables are licensed CC BY 4.0. You can reuse them with attribution and a link to this page. Published by Cornelia Cove LLC.

Prices are published US ranges from the sources listed on each page; anything we calculated ourselves is labeled as an estimate. Get at least three written, itemized local quotes. Run the estimator to build your own range.